Ppe
Ppe: 25 guides in this section.
25 articles in this topic
Fall protection harness: what OSHA requires and how to get it right
OSHA mandates fall protection at 6 ft (construction) or 4 ft (general industry). Learn harness types, inspection steps, and lanyard rules. 2,800-word guide.
Fall protection anchor points: what OSHA requires and how to get it right
OSHA requires fall protection anchors rated to 5,000 lbs per worker. Learn which anchor types qualify, how to inspect them, and what citations to avoid.
Full body harness for fall protection: what OSHA requires and how to get it right
Falls killed 865 workers in 2022. Learn exactly what OSHA requires for full body harnesses, how to inspect and fit them, and when a harness alone isn't enough.
SRL fall protection: what it is, when you need it, and how to choose one
Self-retracting lanyards stop a fall in 2 feet or less. Learn OSHA's SRL rules, inspection steps, class differences, and when SRLs beat traditional lanyards.
Diversified fall protection: every method OSHA requires and when to use each
Fall protection causes more OSHA citations than any other standard. Learn every method, guardrails, harnesses, nets, covers, and when each is required by 29 CFR.
Roof anchors for fall protection: what OSHA actually requires
Roof fall protection anchors must hold 5,000 lbs per worker under OSHA 29 CFR 1926.502. Learn anchor types, installation rules, and inspection requirements.
Werner fall protection: ladders, harnesses, and OSHA compliance explained
Werner makes ladders, harnesses, and fall arrest systems. Here's how their gear maps to OSHA 29 CFR 1926.502 requirements and what small businesses need to know.
Rope grab fall protection: how it works, OSHA rules, and what to buy
Rope grabs stop falls on vertical lifelines. Learn OSHA 29 CFR 1926.502 requirements, how to pick the right device, and common inspection failures. 5-min read.
Beam clamp fall protection: what OSHA requires and how to choose right
Beam clamps are OSHA-compliant anchorage for steel structures when used correctly. Learn load ratings, installation rules, and how to avoid the most cited mistakes.
Fall protection devices: what they are, when OSHA requires them, and how to choose
OSHA requires fall protection at 4 ft (general industry) or 6 ft (construction). Learn every device type, inspection rules, and how to choose the right system.
Fall protection yoyo (SRL): what it is, how to pick one, and when OSHA requires it
A fall protection yoyo (self-retracting lanyard) arrests falls in 2 feet or less. Learn OSHA rules, weight limits, inspection steps, and how to choose the right SRL.
Fall protection kit: what's required, what to buy, and how to use it
OSHA requires fall protection at 4 to 6 ft depending on industry. Learn exactly what a fall protection kit needs, what it costs, and how to stay compliant.
Fall protection gear: what OSHA requires and how to choose it
OSHA requires fall protection at 4 ft (general industry) or 6 ft (construction). Learn which gear, inspection rules, and CFR standards apply to your workplace.
Passive fall protection: what it is, when OSHA requires it, and how to use it
Passive fall protection requires no worker action to work. Learn OSHA's rules (29 CFR 1926.502), when guardrails beat harnesses, and real cost ranges.
Fall protection services: what OSHA requires and what to buy
Falls kill hundreds of U.S. workers every year. Learn which fall protection services OSHA mandates, what they cost, and how to build a compliant program for your site.
Personal protective equipment toolbox talk: a complete guide
Run a PPE toolbox talk that actually changes behavior. Covers OSHA requirements, talking points, common mistakes, and a free sign-in sheet template. 5-min read.
Industrial fall protection: what OSHA requires and how to comply
Falls kill more workers than any other hazard. Learn exactly what OSHA's 29 CFR 1910.28 and 1926.502 require, when each system applies, and how to build your program.
PPE toolbox talk: how to run one that actually sticks
Learn how to run a PPE toolbox talk in 10 minutes or less, what OSHA requires, and get a ready-to-use outline your crew will actually remember.
Fall protection harness inspection: how to do it right
OSHA requires harness inspection before every use. Learn the exact pre-use and annual checks, retirement criteria, and documentation rules, with a printable checklist.
Fall protection solutions: what OSHA requires and what actually works
OSHA requires fall protection at 4 ft (general industry) or 6 ft (construction). Learn which systems, equipment, and written programs you actually need.
Safety equipment at workplace: what OSHA requires and why it matters
OSHA mandates specific safety equipment across 29 CFR 1910 standards. Learn what gear is required, who pays, and how to build a compliant program in plain English.
When must you use fall protection equipment: heights, rules, and exceptions
OSHA requires fall protection starting at 4 feet in general industry and 6 feet in construction. See every threshold, standard, and exception in one place.
N95 vs half-face respirator: OSHA compliance differences explained
N95s and half-face respirators follow different OSHA rules. Learn which standard applies, when a medical eval is required, and what your written program needs.
Self-retracting lifeline requirements and inspection documentation
OSHA requires SRL inspection before each use and annual competent-person checks. Learn the CFR rules, documentation requirements, and what disqualifies an SRL.
How to write a PPE hazard assessment for your shop
Step-by-step guide to writing a OSHA-required PPE hazard assessment for small shops. Covers the 5-step process, required certification, and free templates.